               Loupe

 Mode 'Loupe' allows you to edit
the screen pixel by pixel with the
increase displayed of 4 or 8 times.
In the left part the screen is
edit area, and in the right part preview
area an editable and controls buttons

 4 top button (Xor,Or,And,Nop)
define the mixing mode of the pixels
  Xor - invert the pixel
  Or  - sets the pixel
  And - removes pixel
  Nop - does not change the pixel (maybe
        be used for change the
        attributes, in the mode of
        'sieve', etc.)
 Further, the change position button,
ban color change button and color
selection button.
 The next group of buttons determines
what will be displayed on the screen:
points, lines, continuous line, bold dots
3x3, rectangles, filled rectangles or
fill a closed area.
 Last in this group is a pixels mask
button  highlighted in yellow. More about
it:

   The pixel mask and the sieve...

 The pixel mask button brings up a menu
select mask output pixels. The choice
of the mask uses textures, the selection
and editing of which is described in the
section 'Fill'.

 If you have set the flag 'sieve',
the color of the button mask is changed
to active

 The selected mask is applied to the
output pixels as follows:
 If the corresponding output pixel
the mask is missing then the output is
not occurs, and if present, the output
occurs according to the chosen mode
(Xor/Or/And/Nop)

 Included 'Sieve' is complementary to
the conclusion on the mask processing of
the display area.
 In this mode, if a pixel the
corresponding output in the mask
is absent, then the corresponding pixel
on the screen is reset regardless of the
mode (Xor/Or/And/Nop).

 The last group of buttons includes:
Choice zoom(x4/x8), viewing screen,
a change of screens, undo (swapping),
display the pixel grid, display
boundaries of attrbutes, cursor settings
and the 2nd mouse button settings,
the output of the magnifier.

 It is necessary to say about the
settings :

 Top 3 options - select type of cursor
  3 medium    - setup 2nd mouse button
    where:
     Delete pixel  - to-analogue And
     Undo -> pixel - restore pixel from
                     basket (undo)
     Undo <-> pixel - exchange pixel
                      with basket
Smooth  - when drawing points
          fills in lines and gaps
          during the mouse movement
Scroll - moves the working area
         while drawing, if you out of
         bound and adjusts the cursor
         position

 In addition there are some functions of
magnifying, Which are not displayed
buttons control, but the available for
hotkeys.

  Hotkeys loupe

1    - XOR inversion of the pixel
2    - OR to install pixel
3    - AND remove pixel
4    - NOP does not change the pixel
C    - choice of colour
CS+C - to take color
D    - setting of the cursor and mouse
CS+D - multi-screen
SS+D - select the drive
L    - exchange screens
F    - on/off the pixel grid
E    - on/off toolbar
G    - on attribute grid (preserved)
H    - off the attribute grid
       (restore.)- switches the
       brightness to the saved
SS+H - off brightness
I    - invert pixels in attribute pos.
CS+I - clear character cell
SS+L - load the screen from the disk
SS+S - save the screen to disk
SS+K - save the screen to disk
J    - point (pen)
S    - line
CS+S - broken line
B    - rectangle
CS+B - filled rectangle
N    - New start for the lines,
       rectangles, etc.
CS+N - Select the pixel mask and sieve
CS+J - Fill
SS+J - bold point 3x3
K    - mini RGB
M    - select re-place increase
CS+M - change the magnifier x4 / x8
T    - on/off pointer to the border
       attribute position
CS+T - cell to restore from basket (undo)
       (without attributes)
SS+T - exchange the cell with the basket
       (without attributes)
V    - to look at the whole picture, to
       pressing any key
CS+V - view the second screen, to
       pressing any key
SS+V - to view the screen in monochrome
       (originally 7 color, changing
       when SS+W )
U    - (UNDO) exchange the screen with
       basket
CS+U - the return of the screen from the
       basket (undo)
SS+U - the return of the screen from the
       basket without change the
       attributes
W    - on/off change attributes (No RGB)
CS+W - on/off monochrome
SS+W - on/off monochrome (with current
       selected colour)
Y    - copy the screen to the basket
Z    - erase point
CS+Z - return point from the basket
SS+Z - exchange point with the basket
       ( Z , CS+Z SS+Z - also apply in
       options lines and rectangles for
       all the relevant points )

Cancel - exit
Enter  - to see the whole picture
CS+Q CS+A, CS+O, CS+P and cursor keys -
                move positions on one
                attributes pos.

Note:

 In the monochrome mode on the lens
not displays the attributes of the
screen
 For change the monochrome colour,
select colour RGB, press SS+W, then
CS+W and SS+V will display
at selected colour.
